Our white-furred four-legged best friends are stunning, but white dog fur can stain easily. Is your dog fur stained yellow? Well, we are going to talk about how you can get stains out of your dog’s white coat.
So, how can you get stains out of your dog’s white fur?
To get stains out of your dog’s white fur, follow these steps:
- First, use a whitening shampoo while washing your dog’s hair.
- Next, rinse their fur with warm water.
- Then, condition the fur, rinse with warm water, and dry your dog with their towel.
- Next, depending on what type of fur your dog has, brush their hair with a pin brush or a slicker brush
- Create a paste that is made of using cornstarch and hydrogen peroxide and apply it to the stain.
For a step by step guide to removing stains off of your dog’s white fur, whether it is a saliva stain, a urine stain, or any other stain, and learn about how you can whiten dog fur naturally, then make sure that you continue reading this blog post.
Table of Contents
How to get stains out of white dog fur?
Before we start discussing the steps, let us mention the things that you are going to need to get stains out of your dog’s white fur.
Here is what you are going to need:
- Dog whitening shampoo
- Dog conditioner
- Towel
- Pin brush or slicker brush
- Hydrogen peroxide
- Cornstarch
- Thinning shears (optional)
- Tear stain supplement (optional)
Step number one: Shampoo
- You will first start by washing your pooch’s hair with a whitening shampoo.
- Make sure that you lather up your four-legged best friend properly.
- Do not get the shampoo or even the water into your beloved dog’s eyes and ears.
- Lather the shampoo even more in areas that are more prone to stains. These body areas are the following: the tail, the muzzle, and the chest.
- Let the shampoo sit on your pooch’s hair for at least two minutes, but leave it for five minutes for optimum product absorption.
- I highly recommend Wahl’s White Pear Brightening Shampoo for Pets. It will keep your dog clean, white, and fluffy.
Step number two: Rinse
- Now that you have lathered the shampoo and let the product sit for a few minutes, it is time to rinse the shampoo off.
- Make sure that you rinse your four-legged best friend with lukewarm water.
- Ensure that the shampoo is washed off thoroughly. To do so, run your fingers through your pooch’s hair as you rinse them with the lukewarm water.
Step number three: Condition
- Now that you have washed off the shampoo thoroughly, it is now time for you to apply conditioner.
- When you are applying the conditioner to your dog’s hair, make sure that you avoid getting the product in your pooch’s eyes, ears, and mouth.
- The conditioner you apply should coat your dog’s hair shaft. This protects the hair for absorbing any new stains.
- Next, you are going to rinse your pooch’s hair thoroughly with lukewarm water. You don’t want to leave in any excess conditioner in your dog’s fur.
- I highly recommend Burt’s Bees All Natural Oatmeal Conditioner for Dogs. It is going to moisturize, soften, and & soothe your dog naturally.
Step number four: Brush and detangle
- Now that you are done washing and conditioning your dog’s hair, It is time for you to dry your pooch with a clean towel until they are damp.
- Now, pick a pin brush or slicker brush. This depends on what type of coat your dog has.
- Use a pin brush if your dog has long hair.
- Use a slicker brush if your dog has sensitive skin or a fine coat.
- If you want to pick the best brush for their coat type, I highly recommend that you check out our The Best Dog Grooming Tools: What to Use for Your Dog’s Safety And Hygiene page
- Now that you have the perfect brush with you, brush your dog’s hair in the direction of hair growth to detangle the hair.
- Start brushing from your dog’s head, then move downwards towards the tail
- Focus on the areas where the fur gets stained.
Step number five: Hydrogen Peroxide and Cornstarch paste
- Now that your dog’s hair is detangled, create a paste of hydrogen peroxide and cornstarch.
- Now, apply the paste that you just made on the areas that are still stained.
- Work the paste into your dog’s fur and coat.
- Let the paste on your pooch’s coat for a duration of five to fifteen minutes.
- It all depends on how severe the stain is, but don’t leave the past more than fifteen minutes.
- Next, pick up the brush and brush the stained area thoroughly.
- Then, rinse the paste thoroughly with lukewarm water.
- Finally, dry your dog using a clean towel.
Step number six: Trimming
- The last step is to trim certain areas of dog’s fur, specifically, the areas that are prone to stains. These areas include the muzzle and the chest.
- You can trim these areas with thinning shears.
- You can even use a dog hair clipper if you want to.
- Are you in the market for high-quality thinning shears and dog hair clippers? Then make sure to check out and invest in our The Best Dog Grooming Tools: What to Use for Your Dog’s Safety And Hygiene products!
How to remove saliva stains from white dog fur?
Step number one: Trimming
- Make sure to trim long hairs to get rid of the reddish stained areas.
- You can do so using pet grooming scissors.
- Doing this is going to remove some of the problem areas, and it will minimize redness.
Step number one: Shampoo
- You will first start by washing your pooch’s hair with a whitening shampoo.
- Make sure that you lather up your four-legged best friend properly.
- Do not get the shampoo or even the water into your beloved dog’s eyes and ears.
- Lather the shampoo even more in areas that are more prone to stains. These body areas are the following: the tail, the muzzle, and the chest.
- Let the shampoo sit on your pooch’s hair for at least two minutes, but leave it for five minutes for optimum product absorption.
- I highly recommend Wahl’s White Pear Brightening Shampoo for Pets. It will keep your dog clean, white, and fluffy.
Step number two: Rinse
- Now that you have lathered the shampoo and let the product sit for a few minutes, it is time to rinse the shampoo off.
- Make sure that you rinse your four-legged best friend with lukewarm water.
- Ensure that the shampoo is washed off thoroughly. To do so, run your fingers through your pooch’s hair as you rinse them with the lukewarm water.
Step number four: Hydrogen Peroxide
- Take a cotton ball and dip it in hydrogen peroxide.
- Next, then wipe your dog’s saliva stain with the cotton ball.
- Leave the peroxide on your dog’s stained hair for a minute, then rinse your pooch’s hair with cool water.
How to remove urine stains on dog fur?
Step number one: Brush and Detangle
- Now that you are done washing and conditioning your dog’s hair, It is time for you to dry your pooch with a clean towel until they are damp.
- Now, pick a pin brush or slicker brush. This depends on what type of coat your dog has.
- Use a pin brush if your dog has long hair.
- Use a slicker brush if your dog has sensitive skin or a fine coat.
- If you want to pick the best brush for their coat type, I highly recommend that you check out our The Best Dog Grooming Tools: What to Use for Your Dog’s Safety And Hygiene page
- Now that you have the perfect brush with you, brush your dog’s hair in the direction of hair growth to detangle the hair.
- Start brushing from your dog’s head, then move downwards towards the tail
- Focus on the areas where the fur gets stained.
Step number two: Spot treatment
- You can do a spot-treat for your dog’s urine stain via gently scrubbing the urine stains with a lukewarm damp washcloth.
- If that does not work out, then it is time for you to give your dog a bath.
Step number three: Shampoo
- You will first start by washing your pooch’s hair with a whitening shampoo.
- Make sure that you lather up your four-legged best friend properly.
- Do not get the shampoo or even the water into your beloved dog’s eyes and ears.
- Lather the shampoo even more in areas that are more prone to stains. These body areas are the following: the tail, the muzzle, and the chest.
- Let the shampoo sit on your pooch’s hair for at least two minutes, but leave it for five minutes for optimum product absorption.
- I highly recommend Wahl’s White Pear Brightening Shampoo for Pets. It will keep your dog clean, white, and fluffy.
Step number four: Rinse
- Now that you have lathered the shampoo and let the product sit for a few minutes, it is time to rinse the shampoo off.
- Make sure that you rinse your four-legged best friend with lukewarm water.
- Ensure that the shampoo is washed off thoroughly. To do so, run your fingers through your pooch’s hair as you rinse them with the lukewarm water.
Step number five: Condition
- Now that you have washed off the shampoo thoroughly, it is now time for you to apply conditioner.
- When you are applying the conditioner to your dog’s hair, make sure that you avoid getting the product in your pooch’s eyes, ears, and mouth.
- The conditioner you apply should coat your dog’s hair shaft. This protects the hair for absorbing any new stains.
- Next, you are going to rinse your pooch’s hair thoroughly with lukewarm water. You don’t want to leave in any excess conditioner in your dog’s fur.
- I highly recommend Burt’s Bees All Natural Oatmeal Conditioner for Dogs. It is going to moisturize, soften, and & soothe your dog naturally.
Other questions related to how to get stains out of white fur?
Can I use baking soda on my dog?
Yes! Baking soda is considered to ba natural deodorizer and cleaner that is free of any harmful and toxic chemicals. This makes baking soda safe to use on pets unless they ingest it in large amounts, of course.
Of course, make sure that you consult with your veterinarian before you begin using baking soda on your four-legged best friend.
Can I use hydrogen peroxide to whiten dog fur?
Yes, hydrogen peroxide is considered to be safe to use on dogs. Not only is it safe, but it also has a mild bleaching property, which will aid in whitening your dog’s fur.
That’s it for today’s post. You should now know how to remove stains from your dog’s white fur. To sum it, here are the steps that you should be taking:
- First, use a whitening shampoo while washing your dog’s hair.
- Next, rinse their fur with warm water.
- Then, condition the fur, rinse with warm water, and dry your dog with their towel.
- Next, depending on what type of fur your dog has, brush their hair with a pin brush or a slicker brush
- Create a paste that is made of using cornstarch and hydrogen peroxide and apply it to the stain.
My Sources
- 9 Baking Soda Uses for Pet Owners
- How to Remove Stains From White Fur
- How to Remove Saliva Stains From a Dog’s Coat
- How to Take the Urine Stain Off of Dog Hair
- Fur Whitening – How To Keep Your Dog’s Fur White
